View R5T510E477M010AGA030_8853220.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 1 overview the low esr, surge-robust t510 series is designed for demanding applications that require high surge current and high ripple current capability. this series builds upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low esr, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. these benefts are achieved though the utilization of multiple anodes as well as high-stress, low impedance electrical conditioning performed prior to screening. this series is classifed as msl (moisture sensitivity level) 1 under j std 020: unlimited foor life time at 30c/85% rh. tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2 applications typical applications include decoupling and fltering in automotive end applications, such as dc/dc converters, portable electronics, telecommunications, and control units requiring high ripple current capability. environmental compliance rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder. benefts ? c omplies with aecCq200 ? m eets or exceeds eia standard 535baac ? t aped and reeled per eia 481 ? h igh surge current capability ? o ptional gold-plated terminations ? h igh ripple current capability ? 1 00% surge current test ? 1 00% steady-state accelerated aging ? c apacitance values of 10 f to 1,000 f ? t olerances of 10% and 20% ? v oltage rating of 4 C 50 vdc ? c ase sizes e and x ? e sr as low as 18 m ? r ohs compliant and lead-free terminations ? o perating temperature range of ?55?c to +125?c one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 2 2 k-sim for a detailed analysis of specifc part numbers, please visit ksim.kemet.com to access kemets k-sim software. kemet k-sim is designed to simulate behavior of components with respect to frequency, ambient temperature, and dc bias levels. ordering information t 510 x 477 m 006 a t a030 capacitor class series case size capacitance code (pf) capacitance tolerance rated voltage (vdc) failure design termination finish esr packaging (c-spec) t = tantalum multiple anode low esr e x first two digits represent signifcant fgures. third digit specifes number of zeros. k = 10% m = 20% 004 = 4 006 = 6.3 010 = 10 015 = 15 020 = 20 025 = 25 035 = 35 050 = 50 a = n/a t = 100% matte tin (sn) plated* h = standard solder coated (snpb 5% pb minimum) g = gold plated (a, b, c, d, x only) a = auto grade product 030 = maximum esr in m at room temperature (30m) blank = 7" reel 7280 = 13" reel performance characteristics item performance characteristics operating temperature ?55c to 125c rated capacitance range 10 C 1,000 f at 120 hz/25c capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 4 C 50 v df (120 hz) refer to part number electrical specifcation table esr (100 khz) refer to part number electrical specifcation table leakage current 0.01 cv (a) at rated voltage after 5 minutes tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 3 3 qualifcation test condition characteristics endurance 85c at rated voltage, 2,000 hours 125c at 2/3 rated voltage, 2,000 hours c/c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits storage life 125c at 0 volts, 2,000 hours c/c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits thermal shock milCstdC202, method 107, condition b, mounted, ?55c to 125 c, 1,000 cycles c/c within 5% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits temperature stability extreme temperature exposure at a succession of continuous steps at +25oc, ?55oc, +25oc, +85oc, +125oc, +25oc +25c ?55c +85c +125c c/c il* 10% 10% 20% df il il 1.5 x il 1.5 x il dcl il n/a 10 x il 12 x il surge voltage 85c, 1.32 x rated voltage 1,000 cycles (125c, 1.2 x rated voltage) c/c within 5% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/ vibration milCstdC202, method 213, condition i, 100 g peak milCstdC202, method 204, condition d, 10 hz to 2,000 hz, 20 g peak c/c within 10% of initial value df within initial limits dcl within initial limits *il = initial limit certifcation kemets internal qualifcation plan for this tantalum series of capacitors follows aecCq200 guidelines. standard catalog part types ordered without a specifc automotive designator, i.e., suffx auto or four digit customer specifc designator (c-spec), are not considered kemet automotive grade tantalum capacitors. tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 4 4 1 10 100 100 1000 10000 100000 1000000 10000000 caacitace reec t51022m05ate100 t510m05ate05 t510em05ate050 capacitance vs. frequency impedance, esr vs. frequency 0.01 0.1 1 10 100 100 1,000 10,000 100,000 1,000,000 10,000,000 impedance, esr (ohms) frequency (hz) t510x226m035ate100_imp t510x336m035ate065_imp t510e476m035ate050_imp t510x226m035ate100_esr t510x336m035ate065_esr t510e476m035ate050_esr dimensions ? millimeters (inches) metric will govern h x t b b g f e a l r p side view anode (+) end view bottom view cathode (-) end view w s s termination cutout at kemet's option, either end case size component total weight kemet eia l w h f 0.1 (.004) s 0.3 (.012) b 0.15 (ref) .006 x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) (mg) x 7343C43 7.30.3 (0.2870.012) (0.1690.012) (0.1570.012) (0.094) (0.051) (0.020) (0.0040.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138) (0.2870.012) (0.2360.012) (0.1420.008) (0.161) (0.051) (0.020) (0.0040.004) (0.005) (0.150) (0.138) (0.138) notes: (ref) C dimensions provided for reference only. for low profle cases, no dimensions are provided for b, p or r because these cases do not have a bevel or a notch. these weights are provided as reference. if exact weights are needed, please contact your kemet sales representative. tantalum surface mount capacitors ? automotive grade t510 series automotive grade multiple anode low esr mno 2 electrical characteristics
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 5 5 table 1 C ratings & part number reference rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc @ 85oc f kemet/eia (see below for part options) a @ +20oc max/5 min % @ +20oc 120 hz max m @ +20oc refow 260oc 4 680 x/7343-43 t510x687(1)004a(2)a030 27.2 6.0 30 3000 2700 1200 125 1 4 1000 x/7343-43 t510x108(1)004a(2)a035 40.0 6.0 35 2777 2499 1111 125 1 4 1000 e/7360-38 t510e108(1)004a(2)a018 40.0 6.0 18 3979 3581 1592 125 1 6.3 470 x/7343-43 t510x477(1)006a(2)a030 29.6 6.0 30 3000 2700 1200 125 1 6.3 680 x/7343-43 t510x687(1)006a(2)a023 42.8 6.0 23 3426 3083 1370 125 1 6.3 680 e/7360-38 t510e687(1)006a(2)a023 42.8 6.0 23 3520 3168 1408 125 1 10 330 x/7343-43 t510x337(1)010a(2)a035 33.0 6.0 35 2777 2499 1111 125 1 16 150 x/7343-43 t510x157(1)016a(2)a040 24.0 6.0 40 2598 2338 1039 125 1 16 220 x/7343-43 t510x227(1)016a(2)a040 35.2 10.0 40 2598 2338 1039 125 1 20 100 x/7343-43 t510x107(1)020a(2)a035 20.0 8.0 35 2777 2499 1111 125 1 20 100 x/7343-43 t510x107(1)020a(2)a040 20.0 6.0 40 2598 2338 1039 125 1 20 100 x/7343-43 t510x107(1)020a(2)a045 20.0 6.0 45 2449 2204 980 125 1 25 68 x/7343-43 t510x686(1)025a(2)a045 17.0 8.0 45 2449 2204 980 125 1 25 100 e/7360-38 t510e107(1)025a(2)a050 25.0 8.0 50 2387 2148 955 125 1 35 22 x/7343-43 t510x226(1)035a(2)a100 7.7 6.0 100 1643 1479 657 125 1 35 22 x/7343-43 t510x226(1)035a(2)a080 7.7 6.0 80 1837 1653 735 125 1 35 22 x/7343-43 t510x226(1)035a(2)a060 7.7 6.0 60 2121 1909 848 125 1 35 33 x/7343-43 t510x336(1)035a(2)a065 11.6 6.0 65 2038 1834 815 125 1 35 47 x/7343-43 t510x476(1)035a(2)a055 16.5 8.0 55 2216 1994 886 125 1 35 47 x/7343-43 t510x476(1)035a(2)a065 16.5 8.0 65 2038 1834 815 125 1 35 47 e/7360-38 t510e476(1)035a(2)a050 16.5 8.0 50 2387 2148 955 125 1 50 10 x/7343-43 t510x106(1)050a(2)a090 5.0 8.0 90 1732 1559 693 125 1 50 10 x/7343-43 t510x106(1)050a(2)a120 5.0 8.0 120 1500 1350 600 125 1 50 22 x/7343-43 t510x226(1)050a(2)a100 11.0 8.0 100 1643 1479 657 125 1 vdc @ 85oc f kemet/eia (see below for part options) a @ +20oc max/5 min % @ +20oc 120 hz max m @ +20oc refow 260oc (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum), n = non-magnetic 100% tin (sn), m = non-magnetic (snpb). designates termination finish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 6 6 recommended voltage derating guidelines ?55c to 85c 85c to 125c % change in working dc voltage with temperature v r 67% of v r recommended maximum application voltage 50% of v r 33% of v r ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: 1 . the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. 2 . the negative peak ac voltage in combination with bias voltage, if any, must not exceed the allowable limits specifed for reverse voltage. see the reverse voltage section for allowable limits. the maximum power dissipation by case size can be determined using the table at right. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the table below for temperature compensation requirements. temperature compensation multipliers for maximum ripple current t 25c t 85c t 125c t= environmental temperature the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. kemet series and case code eia case code maximum power dissipation (p max) mwatts at 25c w/+20c rise a 3216C18 75 b 3528C21 85 c 6032C28 110 d 7343C31 150 x 7343C43 165 e 7360C38 200 s 3216C12 60 t 3528C12 70 u 6032C15 90 v 7343C20 125 t510x 7343C43 270 t510e 7360C38 285 using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = z p max/r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation (watts) r = esr at specifed frequency (ohms) z = impedance at specifed frequency (ohms) 0% 20% 40% 60% 80% 100% 120% ? 55 25 85 125 % working voltage % change in working dc voltage with temperature temperature (oc) 67% 33% recommended maximum application voltage (as % of rated voltage) tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 7 7 reverse voltage solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. the positive terminal is identifed on the capacitor body by a stripe plus in some cases a beveled edge. a small degree of transient reverse voltage is permissible for short periods per the table. the capacitors should not be operated continuously in reverse mode, even within these limits. temperature permissible transient reverse voltage 25c 15% of rated voltage 85c 5% of rated voltage 125c 1% of rated voltage e 1 7360C38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 x 1 7343C43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component desity product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering. 2 land pattern geometry is too small for silkscreen outline. l s w w l v1 v2 grid placement courtyard tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 8 8 soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the gold-colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y, and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w, and z storage tantalum chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperature C reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 60% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within three years of receipt. time te mp erature t smin 25 t smax t l t p maximum ramp up rate = 3oc/sec maximum ramp down rate = 6oc/sec t p t l t s 25oc to peak tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 9 9 construction leadframe (? cathode) leadframe (+ anode) tantalum wire molded epoxy case molded epoxy case polarity bevel (+) weld (to attach wire) silver adhesive detailed cross section tantalum wire tantalum silver paint (fourth layer) washer washer polarity stripe (+) ta 2 o 5 dielectric (first layer) carbon (third layer) mno 2 (second layer) capacitor marking * 230 = 30 th week of 2012 kemet multi-anode mno 2 polarity indicator (+) rated voltage picofarad code kemet id date code* date code * 1 st digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 10 10 tape & reel packaging information kemets molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 3,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 q 7343-12 12 1,000 3,000 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 11 11 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre eling cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] table 4 ? embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1.5+0.10/?0.0 (0.059+0.004/?0.0) 1.0 (0.039) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm 2.00.1 (0.0790.059) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 4). 3. if s < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements. variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 , b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.50.05 (0.1380.002) 2.00.05 or 4.00.10 (0.0790.002 or 0.1570.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.50.05 (0.2170.002) 2.00.05 (0.0790.002) or 4.00.10 (0.1570.004) or 8.00.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.10 (0.2950.004) 4.00.10 (0.1570.004) to 12.00.10 (0.4720.004) 8.0 (0.315) 16.3 (0.642) tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 12 12 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t center line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tap e 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo sse d carrier p unc hed ca rrier tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 13 13 figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w3 (includes flange distortion at outer edge) w2 (m ea sured at hu b) w1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n table 5 ? reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 1780.20 (7.0080.008) or 3300.20 (13.0000.008) (0.059) 13.0+0.5/?0.2 (0.521+0.02/?0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4+1.5/?0.0 (0.331+0.059/?0.0) 14.4 (0.567) shall accommodate tape width without interference 12 mm 12.4+2.0/?0.0 (0.488+0.078/?0.0) (0.724) 16.4+2.0/?0.0 (0.646+0.078/?0.0) (0.882) tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 14 14 figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2055_t510_auto ? 9/19/2016 15 15 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. tantalum surface mount capacitors C automotive grade t510 series automotive grade multiple anode low esr mno 2

▲Up To Search▲

Price & Availability of R5T510E477M010AGA030

	To Download R5T510E477M010AGA030 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .